132kV Resident Engineer (ti)

Job Description

We can't predict what the future holds, but we know Texas Instruments will have a part in shaping it.
Texas Instruments (TI) is looking for an experienced 132kV Resident Engineer to join our team. TI Facilities operates over 150 different utility systems that include chemicals, gasses, variety of electrical systems, water systems, HVAC, waste, vacuum, and controls. These systems are designed to run 24 hours a day, 365 days a year without interruption, creating a state of the art manufacturing environment. Facilities works closely with TI’s manufacturing team to understand how the utility systems impact the process as well as how to reduce consumption.

• Work closely with operation Manager to review, evaluate and operate the electrical system including but not limited to:
  • High & Medium Voltage distribution:
    • 132kV Switchgear and Breakers
    • 11kV Switchgears and Breakers
    • Transformers
    • Protection relays
    • Electrical testing & commissioning (TTR, insulation resistance, Power Factor Insulation, Dissolved Gas Analysis, Dielectric Breakdown Voltage, Circuit Breaker Testing, Protective Relay Calibration).
  • Low Voltage systems
  • Power System Study (Short Circuit, Coordination, Arc Flash)
  • Power System and Controls single-line diagram interpretation
  • Semi-conductor factory power supply distributions
  • Emergency generators system
  • UPS (Uninterruptible Power Supply) system
  • VSC (Voltage Sag Correctors)
  • VFD (Variable-speed drives)
  • Transfer Switches - ATS (Automatic Transfer Switch) or CTTS (Closed Transition Transfer Switch)
• To provide advice to management on the compliance to the Electricity Supply Act 447 and Electricity Regulation 1994
• To act as a registered competent person for the company. Responsible to ensure compliance to the stipulated act and perform the full duty of a 132kV resident engineer as stipulated in the act.
• Responsible to sign off Permit to Work for electrical projects and maintenance. To ensure all safety standards are complied
• Responsible to perform new production tool buy off to ensure compliance to the act
• To audit TIEM electrical installations to ensure compliance to the act
• To work closely with the electrical engineer on project design and commissioning as per the act
• Guide chargemans of the site to maintain electrical equipment.
• Liaison between owner and energy commission in any mode of communications including the submission of weekly Borang I to ST.
• Responsible to sign IOM between owner and TNB
• To liaise with National Load Dispatch Center (NLDC), GSO, TNB and ST for any switching required.
• Advice and assist in the establishment of the Emergency Response Plan and Emergency Remedial and Recovery Action Plan.                                               
• Monitor, review and analyze any alarms, update FMEA & electrical risk assessment.
• To perform weekly inspection of 132kV installations and submit report to Energy Commission.
• Liaise with TNB, NLDC and local authorities, legal & ESH related to power supply outage and plan shutdown maintenance, activities pertaining to electrical and HV power distribution system. To attend to power supply interruption and breakdown.
• Ensure all maintenance and operations programs are properly implemented in order to have optimum and sustainable performances (approximate to designed performances) of all installations included in the limit of scope
• Ensure no downtime which caused by lack of maintenance or troubleshooting, improper maintenance or troubleshooting procedure or not adequate maintenance frequency for equipment which covered under this scope of works
• Ensure smooth operation without Interruption or Near miss due to negligence in daily operation and maintenance activities
• Ensure that scheduled routine taking reading and maintenance work if necessary for HT/LV and genset system are carried out
• Monitor defect rectification works by turnkey contractor
• Comply predefined schedule and complete all maintenance and operation on time
• Ensure all relevant law statues and regulation relating to electrical system and installation are comply with
• Ensure the system is complying with all legal requirement and internal control limit
• Arrange and supervise manning for a day to day maintenance and services operation and ensure to all planned activities
• Optimize maintenance and operation procedures to improve energy saving
• Able to manage the maintenance scope (maintenance, repair & operations (MRO) for building M&E, RO water treatment plant, Compressor ((CDA (Clean Dry Air) Systems – Compressors, driers, cooling system, boosters, motors, piping, valves, actuators)), Vacuum Chiller  ,HVAC Cooling  system and Bulk gas system
• Able to manage Vacuum Systems – Plant vacuum equipment, distribution system, controls, and monitoring
• SCADA and Controls Systems – monitoring and alarm management, trending and reporting for all site systems
• Support and monitoring of all site systems overnight, weekends, and holidays when other site personnel are not immediately available and emergency situations.

Minimum Requirements:

• Degree in Electrical Engineering registered with BEM.
• Registered professional Electrical Engineer with BEM including signing authority.
• Minimum of 10 years knowledge in Manufacturing industry and 5 years of knowledge in 132kV operations.
• Registered with Energy Commission of Malaysia as a 132kV Competent Engineer (JEK).

Why TI? 

• Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics.
• We’re different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours.  Meet the people of TI
• Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us.

About Texas Instruments

As a global semiconductor company, we design, manufacture, test and sell analog and embedded processing chips to nearly 100,000 customers. Our products enable electronics everywhere and in things you experience every day - from health care, smart homes and connected cars to drones, smart phones and more. Our passion to create a better and more sustainable world by making electronics more affordable through semiconductors drives us to make our technology smaller, more efficient, more reliable and more affordable.